XD-1028 Thermostat Temperature Controller Switch Refrigeration H
XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H XD-1028 Thermostat Temperature Controller Switch Refrigeration H

XD-1028 Thermostat Temperature Controller Switch Refrigeration H

$4.41  $2.65
Save: 40% off

Feature:

Specifications model: XD-1028
Temperature control: ON-OFF
Control mode: Heating, cooling, refrigeration
Temperature control range: 20-90
Control accuracy: 0.1
Hysteresis setting: 1-10
Refresh rate: 0.5S
Power supply voltage: DC 12V
Static current: ≤ 3MA pull current ≤ 60MA
Output voltage: DC12V
Output power: up to 200W
Appearance size: 36.5 * 36.5 * 18mm
Mounting screw: M3 * 2 Diagonal dimension 39.5mm
Temperature probe: 10K thermistor B25 = 10K 3950 0.5 meter waterproof sensor
Environmental requirements: -10 to 60
Humidity 20 -85

Product parameters:

According to your needs and the drawings to connect the circuit, power supply is DC 12V (+12V is positive, GND is negative)
Temperature control probe should be placed on the object
For heating: Please connect the 12V heater to the -H + (note the positive and negative)
For refrigeration: Please connect to the +C- (note the positive and negative)
For cooling: Please connected the cooler or cooling fan to the +C- (note the positive and negative)

Indicator state description:

The red indicator light on the board means that the cooling (+ C-) has an output
No light means heating (-H +) has an output

Parameter function description:

The temperature control switch board is set to use the DIP switch mode, 1-4 for the temperature control selection, 5-6 for the hysteresis setting, from right to left to binary mode from small to large settings, when the temperature control switch is fully closed state, Only -H + has output, not controlled.
For example: Adds temperature control switch to radiator, when the temperature is higher than 30 degrees, open the cooling fan, the temperature is lower than 25 degrees turn off the cooling fan
DC12V connected to the power supply terminal, the cooling fan connected to the +C-
We want to set the parameters is: temperature control =30 hysteresis =5
According to the parameters of the table and known as 2, 4 open for the temperature control 30 degrees, 5 degrees for the hysteresis 5 degrees The other is fully closed, set OK!

Package includes:

1 x XD-1028 Thermostat















Add to Cart:

  • Model: SKU484931
  • 100 Units in Stock